top of page
Search
tedwawonmoononning

Le virus C ,Batch le plus dangereux: comment il désactive tous les disques durs



I have a specific piece of hardware which I'd like to disable and re-enable each time my Windows restarts. I created a batch script which is supposed to do that, along with running my program afterwards:




C ,Batch Virus code to disable All Hard disk



Run Command Prompt, After navigating to the infected drive, type del *. lnk command and press Enter to delete all the shortcuts from external hard drive. Then, type attrib -s -r -h /s /d * to restore the files hidden by the shortcut virus.


If some essential files are missing, don't worry. EaseUS Data Recovery Wizard can scan your device and locate deleted files. This reliable data recovery software can recover deleted files from Recycle Bin or recover data from virus/malware attacks, accidental deletion, hard drive formatting/corrupting, partition loss, and more.


EaseUS Data Recovery Wizard will immediately start a scan process to find your deleted or hidden files on the virus infected hard drive. To quickly locate the wanted files, you can use the Filter or type grouping feature to display only the pictures, videos, documents, emails, etc.


To sum up, this page includes the complete solutions to help you completely clean up and remove shortcut virus from USB, pen drive, external hard drive, and PC. CMD, BAT file, deleting Registry keys, and virus removal software are all applicable ways to fix shortcut virus issue.


Run Command Prompt, After navigating to the infected drive, type del *. lnk command and press Enter to delete all the shortcuts from external hard drive. Then, type attrib -s -r -h /s /d * to restore the files hidden by the shortcut virus.


If a driver is identified in the stop error message, contact the manufacturer for an update. If no updates are available, disable the driver, and monitor the system for stability. Run chkdsk /f /r to detect and repair disk errors. Restart the system before the disk scan begins on a system partition. Contact the manufacturer for any diagnostic tools that they may provide for the hard disk subsystem. Try to reinstall any application or service that was recently installed or updated. It's possible that the crash was triggered while the system was starting applications and reading the registry for preference settings. Reinstalling the application can fix corrupted registry keys. If the problem persists, and you have run a recent system state backup, try to restore the registry hives from the backup.


This stop error is commonly caused by corruption in the NTFS file system or bad blocks (sectors) on the hard disk. Corrupted drivers for hard disks (SATA or IDE) can also adversely affect the system's ability to read and write to disk. Run any hardware diagnostics that are provided by the manufacturer of the storage subsystem. Use the scan disk tool to verify that there are no file system errors. To do this step, right-click the drive that you want to scan, select Properties, select Tools, and then select the Check now button. Update the NTFS file system driver (Ntfs.sys). Apply the latest cumulative updates for the current operating system that's experiencing the problem.


This stop error code is caused by a faulty driver that doesn't complete its work within the allotted time frame in certain conditions. To help mitigate this error, collect the memory dump file from the system, and then use the Windows Debugger to find the faulty driver. If a driver is identified in the stop error message, disable the driver to isolate the problem. Check with the manufacturer for driver updates. Check the system log in Event Viewer for other error messages that might help identify the device or driver that's causing stop error 0x133. Verify that any new hardware that's installed is compatible with the installed version of Windows. For example, you can get information about required hardware at Windows 10 Specifications. If Windows Debugger is installed, and you have access to public symbols, you can load the c:\windows\memory.dmp file into the debugger. Then refer to Determining the source of Bug Check 0x133 (DPC_WATCHDOG_VIOLATION) errors on Windows Server 2012 to find the problematic driver from the memory dump.


Your application's window must be in the foreground to receive this message. The message handler should return TRUE to cancel AutoRun and FALSE to enable it. The following code fragment illustrates how to use this message to disable AutoRun.


This feature should not be used to distribute applications on removable media. Because implementing AutoRun on removable media provides an easy way to spread computer viruses, users should be suspicious of any publicly distributed floppy disk that contains an Autorun.inf file.


AutoRun-compatible drivers are provided with some removable disk drives, as well as some other types of removable media such as CompactFlash cards. AutoRun also works with network drives that are mapped to a drive letter with Windows Explorer or mounted with the Microsoft Management Console (MMC). As with mounted hardware, a mounted network drive must have an Autorun.inf file in its root directory, and must not be disabled through the registry.


Another common possible cause is that there could be bad disk blocks. If there are bad sectors in your hard drive, Windows stop code Critical Process Died on startup may happen. In this case, you need to check whether there are bad sectors in your disk.


Step 1: After launching MiniTool Partition Wizard, select a target hard drive and right-click on this disk to select the Surface Test function. You can also click this feature from the Check Disk menu.


In addition, you can also do a partition surface test by checking each sector on all partitions. After finishing disk errors check, you can ensure whether there are bad sectors or not in your hard drive. And then please take measures according to the actual situation.


After finishing checking the disk, you might discover the bad errors in the disk. In this case, in order to reduce the risk of data loss, you should make a backup for all your important data on the hard drive after shielding the bad sectors.


Step 2: Then you need to choose a disk to copy the source content to. All data from the source disk will be copied there. During copy operation, target disk content will be deleted, so you should make a backup for the data if there are important files saved on the source hard drive. Then click the Next button.


SuperFetch is a feature that helps decrease boot time by making apps load more efficiently. However, it can cause problems with your drive. To disable it, launch the Command Prompt as Admin and type: net.exe stop superfetch and hit Enter. Give it a few minutes and see if that improves the disk usage percentage in Task Manager.


Attempting to clean/fix a PC (with Tron or any other tool) that's been compromised by malware and such can result in partially or completely disabling that PC, and can require a full reinstallation of Windows to restore full functionality. This isn't a "Tron issue", this is just how PCs are. Before you run Tron, be aware that the act of cleaning/repairing your PC can inadvertently disable your PC or adversely affect your data in the process. Your system may or may not be repairable; your data may or may not be recoverable. If you choose to run Tron anyway you must be prepared for the possibility of reformatting the hard drive, reinstalling Windows, and recovering your data from a backup.


If you don't see "Select" in the title bar and Tron is seemingly frozen, then it's most likely that Tron is working on one of the functions that takes more time than others. These longer functions include the de-bloat process in Stage 2, the virus removal in Stage 3 (which includes several different antivirus engines), the SFC (System File Checker) and/or DISM (Deployment Image Servicing and Management) check in Stage 4, or the defragmentation in Stage 6 (for spinning disks only; SSD's are automatically exempt from defragmentation). All of these actions take time to complete and are primarily disk-bound. meaning that systems with slower hard drives and/or lots of files will take longer, potentially several hours to complete just that particular stage.


Yes, Tron can be slow. The current record for longest run-time was set by /u/MCGamer20000 at 89 hours. Many of Tron's functions are quick and painless even on the slowest of systems, but Tron does include functions that are resource-intensive and can take several hours to complete. These longer functions include the de-bloat process in Stage 2, the virus removal in Stage 3 (which includes several different antivirus engines), the SFC (System File Checker) and/or DISM (Deployment Image Servicing and Management) check in Stage 4, or the defragmentation in Stage 6 (for spinning disks only; SSD's are automatically exempt from defragmentation). All of these actions take time to complete and are primarily disk-bound. meaning that systems with slower hard drives and/or lots of files will take longer, potentially several hours to complete just that particular stage.


This is more complicated than a simple yes/no response can allow. Several of Tron's tools will delete files as a matter of course; the Tempclean stage, for example, will delete tons of cache files from your system, potentially freeing up gigabytes of space. But these cache files aren't "important" in the common term. Cache files aren't your pictures, your MP3s, your documents, etc. They're code and pictures from web sites, scratch files created by programs, and things like that. They're files that will be recreated without error or consequence if they're needed again, and never missed if they're not needed again. However, other tools (for example, those employed in the Disinfect stage) can potentially delete files that are important to you IF they're infected. You may have an application on your computer which is secretly a trojan, or a picture which may have an embedded virus in it, and after the Disinfect stage is complete that application or picture may have been deleted because of that infection. As long as your files aren't secretly hiding some malicious code and you've made a backup before running Tron (just in case), you can safely assume that Tron will not randomly delete your important files. 2ff7e9595c


0 views0 comments

Recent Posts

See All

Comentarios


bottom of page